Key rack for wall – Unfinished buildings, such as garages, outbuildings or sheds, may lose much storage space by not using the space between wall studs or bolts. Building a simple set of shelves for storage allows you to store small objects out of the way and allow for the safe use of the building. You can stay organized and easily find the items you are looking for at anytime. Measure the distance between the beams from which you want to install the shelves. Measure from the inside edges of the beams. Distance calls the “width of the platform.” Using a hand saw or power saw, cut a rectangular piece of 1/2 inch plywood that is 72 inches tall and is the same width as the shelf.
Place two pieces of 72-inch cardboard 1 by 4 inches into the ground, in their narrow edges and parallel to each other, separated by the width of the platform. Place the rectangular piece of plywood on top of the boards 1-for-4. The edges of the rectangular plate must be aligned with the edges of the plates 1-by-4. Nail the plywood in Tables 1-for-4 with 6d common nails and a hammer. When finished, turn the structure completed over the placement of the plates 1-for-4 at the top. Cut six pieces 1 by 4 board to the width of the platform least 1 1/2 inches.
Place the six boards at right angles to the boards of 1 by 4 inches connected to the plywood. The six tables will become the shelves. Place one on each end, even with the ends of the boards 1-for-4 and another room at intervals of 1 foot. Nail in place with 6d nails and a hammer. You have completed the key rack for wall unit. Feel the shelf and slide into place between the rafters. Nail in place with 10d common nails and a hammer. Altering the key rack for wall space to meet your needs when you position them.