Garage door window inserts – Starting with grip insert a window near a corner with one hand and pull it out of the panel window for about 2 to 3 inches. If the window insert has a crossbar in its pattern, pull it out on the crossbar while removing the corner. Work corner of the lid to extract it from the window frame. Pull the edge of the cover to remove it from the garage window frame, working from the loose corner through each side of the insert. Remove all inserts from the garage door window using the same method.
Clean the outside of the glass of the garage window. Place the new window inserts under the garage door windows. Step back away from the inserts and verify the pattern matches the door, paying special attention to the curve of the pattern. Moisten the window panel of the garage door window inserts with the window cleaner. Do not dry the glass sheet. The window cleaner lubricates the glass sheet. Hold a corner of the window insert against its corner of the garage window glass. The textured side of the window insert should be outside the glass sheet.
Fold the insert window lightly and place each corner of the piece in its respective garage door corner glass window. This causes the center of the insert to lean out away from the glass sheet. Apply pressure to the center of the garage door window inserts. And work the edge of the insert into the junction between the glass of the garage door window and its window frame. If the insert adheres to the glass frame or window, moisten the insert with the window cleaner. Repeat this procedure for each window insertion.garage door window inserts, garage door window panel inserts, garage window inserts, snap-in decorative window insert removal and replacement garage doors, commercial garage door windows, replacing garage door window inserts, how to safely remove insertsfrom garage door windows